| PIC10F200 | ||||
|---|---|---|---|---|
| CONFIG (address:0x0FFF, mask:0x001D, default:0x001D) | ||||
| OSC -- Oscillator (bitmask:0x0001) | ||||
| OSC = IntRC | 0x0FFF | This is the only option. It is here for backward compatibility. | ||
| WDTE -- Watchdog Timer (bitmask:0x0004) | ||||
| WDTE = OFF | 0x0FFB | WDT disabled. | ||
| WDTE = ON | 0x0FFF | WDT enabled. | ||
| CP -- Code Protect (bitmask:0x0008) | ||||
| CP = ON | 0x0FF7 | Code protection on. | ||
| CP = OFF | 0x0FFF | Code protection off. | ||
| MCLRE -- Master Clear Enable (bitmask:0x0010) | ||||
| MCLRE = OFF | 0x0FEF | GP3/MCLR pin fuction is digital I/O, MCLR internally tied to VDD. | ||
| MCLRE = ON | 0x0FFF | GP3/MCLR pin function is MCLR. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.