All Enhanced Extended Regular 12 bits 14 bits 16 bits RAM
size
ROM
size
EEPROM
size
Common
SFRs
Features Configuration Bits RAM map SFR map
PIC10LF320
CONFIG (address:0x2007, mask:0x1FFF, default:0x1FFF)
FOSC -- Oscillator Selection bits (bitmask:0x0001)
FOSC = INTOSC 0x3FFE INTOSC oscillator: CLKIN function disabled.
FOSC = EC 0x3FFF EC: CLKIN function enabled.
BOREN -- Brown-out Reset Enable (bitmask:0x0006)
BOREN = OFF 0x3FF9 Brown-out Reset disabled.
BOREN = SBODEN 0x3FFB Brown-out Reset controlled by the SBOREN bit in the BORCON register.
BOREN = NSLEEP 0x3FFD Brown-out Reset enabled while running and disabled in Sleep.
BOREN = ON 0x3FFF Brown-out Reset enabled.
WDTE -- Watchdog Timer Enable (bitmask:0x0018)
WDTE = OFF 0x3FE7 WDT disabled.
WDTE = SWDTEN 0x3FEF WDT controlled by the SWDTEN bit in the WDTCON register.
WDTE = NSLEEP 0x3FF7 WDT enabled while running and disabled in Sleep.
WDTE = ON 0x3FFF WDT enabled.
PWRTE -- Power-up Timer Enable bit (bitmask:0x0020)
PWRTE = ON 0x3FDF PWRT enabled.
PWRTE = OFF 0x3FFF PWRT disabled.
MCLRE -- MCLR Pin Function Select bit (bitmask:0x0040)
MCLRE = OFF 0x3FBF MCLR pin function is digital input, MCLR internally tied to VDD.
MCLRE = ON 0x3FFF MCLR pin function is MCLR.
CP -- Code Protection bit (bitmask:0x0080)
CP = ON 0x3F7F Program memory code protection is enabled.
CP = OFF 0x3FFF Program memory code protection is disabled.
LVP -- Low-Voltage Programming Enable (bitmask:0x0100)
LVP = OFF 0x3EFF High-voltage on MCLR/VPP must be used for programming.
LVP = ON 0x3FFF Low-voltage programming enabled.
LPBOR -- Brown-out Reset Selection bits (bitmask:0x0200)
LPBOR = OFF 0x3DFF BOR disabled.
LPBOR = ON 0x3FFF BOR enabled.
BORV -- Brown-out Reset Voltage Selection (bitmask:0x0400)
BORV = HI 0x3BFF Brown-out Reset Voltage (Vbor), high trip point selected.
BORV = LO 0x3FFF Brown-out Reset Voltage (Vbor), low trip point selected.
WRT -- Flash Memory Self-Write Protection (bitmask:0x1800)
WRT = ALL 0x27FF 000h to 0FFh write protected, no addresses may be modified by PMCON control.
WRT = HALF 0x2FFF 000h to 07Fh write protected, 080h to 0FFh may be modified by PMCON control.
WRT = BOOT 0x37FF 000h to 03Fh write protected, 040h to 0FFh may be modified by PMCON control.
WRT = OFF 0x3FFF Write protection off.

This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.