PIC12C671 | ||||
---|---|---|---|---|
CONFIG (address:0x2007, mask:0x3FFF, default:0x3FFF) | ||||
FOSC -- Oscillator selection bits (bitmask:0x0007) | ||||
FOSC = LP | 0x3FF8 | LP oscillator. | ||
FOSC = XT | 0x3FF9 | XT oscillator. | ||
FOSC = HS | 0x3FFA | HS oscillator. | ||
FOSC = INTRCIO | 0x3FFC | INTRC, OSC2 is I/O. | ||
FOSC = INTRCCLK | 0x3FFD | INTRC, Clockout on OSC2. | ||
FOSC = EXTRCIO | 0x3FFE | EXTRC, OSC2 is I/O. | ||
FOSC = EXTRCCLK | 0x3FFF | EXTRC, Clockout on OSC2. | ||
WDTE -- Watchdog Timer Enable bit (bitmask:0x0008) | ||||
WDTE = OFF | 0x3FF7 | WDT disabled. | ||
WDTE = ON | 0x3FFF | WDT enabled. | ||
PWRTE -- Power Up Timer (bitmask:0x0010) | ||||
PWRTE = ON | 0x3FEF | Enabled. | ||
PWRTE = OFF | 0x3FFF | Disabled. | ||
MCLRE -- Master Clear Enable (bitmask:0x0080) | ||||
MCLRE = OFF | 0x3F7F | Master Clear disabled. | ||
MCLRE = ON | 0x3FFF | Master Clear enabled. | ||
CP -- Code Protection bits (bitmask:0x3F60) | ||||
CP = ALL | 0x009F | All memory is code protected. | ||
CP = 75 | 0x15BF | 0200h-03FEh code protected. | ||
CP = 50 | 0x2ADF | Do not use. | ||
CP = OFF | 0x3FFF | code protection off. |
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.