| PIC16C433 | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x3FFF, default:0x3FFF) | ||||
| FOSC -- Oscillator selection bits (bitmask:0x0007) | ||||
| FOSC = LP | 0x3FF8 | LP oscillator. | ||
| FOSC = XT | 0x3FF9 | XT oscillator. | ||
| FOSC = HS | 0x3FFA | HS oscillator. | ||
| FOSC = EXTCLK | 0x3FFB | EC I/O. | ||
| FOSC = INTRCIO | 0x3FFC | INTRC, OSC2 is I/O. | ||
| FOSC = INTRCCLK | 0x3FFD | INTRC, clockout on OSC2. | ||
| FOSC = EXTRCIO | 0x3FFE | EXTRC, OSC2 is I/O. | ||
| FOSC = EXTRCCLK | 0x3FFF | EXTRC, clockout on OSC2. | ||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0008) | ||||
| WDTE = OFF | 0x3FF7 | WDT disabled. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power-up Timer Enable bit (bitmask:0x0010) | ||||
| PWRTE = ON | 0x3FEF | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| MCLRE -- Master Clear Enable (bitmask:0x0080) | ||||
| MCLRE = OFF | 0x3F7F | Internal. | ||
| MCLRE = ON | 0x3FFF | External. | ||
| CP -- Code Protection bits (bitmask:0x3F60) | ||||
| CP = ALL | 0x009F | All memory is code protected. | ||
| CP = 75 | 0x15BF | 0200h-07FEh code protected. | ||
| CP = 50 | 0x2ADF | 0400h-07FEh code protected. | ||
| CP = OFF | 0x3FFF | Code protection off. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.