| PIC16C774 | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x3F7F, default:0x3F7F) | ||||
| FOSC -- Oscillator selection bits (bitmask:0x0003) | ||||
| FOSC = LP | 0x3FFC | LP oscillator. | ||
| FOSC = XT | 0x3FFD | XT oscillator. | ||
| FOSC = HS | 0x3FFE | HS oscillator. | ||
| FOSC = RC | 0x3FFF | RC oscillator. | ||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0004) | ||||
| WDTE = OFF | 0x3FFB | WDT disabled. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power-up Timer Enable bit (bitmask:0x0008) | ||||
| PWRTE = ON | 0x3FF7 | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| BOREN -- Brown-out Reset Enable bit (bitmask:0x0040) | ||||
| BOREN = OFF | 0x3FBF | BOR disabled. | ||
| BOREN = ON | 0x3FFF | BOR enabled. | ||
| BODENV -- Brown Out Voltage (bitmask:0x0C00) | ||||
| BODENV = 45 | 0x33FF | VBOR set to 4.5V. | ||
| BODENV = 42 | 0x37FF | VBOR set to 4.2V. | ||
| BODENV = 27 | 0x3BFF | VBOR set to 2.7V. | ||
| BODENV = 25 | 0x3FFF | VBOR set to 2.5V. | ||
| CP -- Code Protection bits (bitmask:0x3330) | ||||
| CP = ALL | 0x0CCF | All memory is code protected. | ||
| CP = 75 | 0x1DDF | 0400h-0FFFh code protected. | ||
| CP = 50 | 0x2EEF | 0800h-0FFFh code protected. | ||
| CP = OFF | 0x3FFF | Code protection off. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.