| PIC16F684 | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x0FFF, default:0x0FFF) | ||||
| FOSC -- Oscillator Selection bits (bitmask:0x0007) | ||||
| FOSC = LP | 0x3FF8 | LP oscillator: Low-power crystal on RA4/OSC2/CLKOUT and RA5/OSC1/CLKIN. | ||
| FOSC = XT | 0x3FF9 | XT oscillator: Crystal/resonator on RA4/OSC2/CLKOUT and RA5/OSC1/CLKINT. | ||
| FOSC = HS | 0x3FFA | HS oscillator: High-speed crystal/resonator on RA4/OSC2/CLKOUT and RA5/OSC1/CLKIN. | ||
| FOSC = EC | 0x3FFB | EC: I/O function on RA4/OSC2/CLKOUT pin, CLKIN on RA5/OSC1/CLKIN. | ||
| FOSC = INTOSCIO | 0x3FFC | INTOSCIO oscillator: I/O function on RA4/OSC2/CLKOUT pin, I/O function on RA5/OSC1/CLKIN. | ||
| FOSC = INTOSCCLK | 0x3FFD | INTOSC oscillator: CLKOUT function on RA4/OSC2/CLKOUT pin, I/O function on RA5/OSC1/CLKIN. | ||
| FOSC = EXTRCIO | 0x3FFE | EXTRCIO oscillator: External RC on RA5/OSC1/CLKIN, I/O function on RA4/OSC2/CLKOUT pin. | ||
| FOSC = EXTRCCLK | 0x3FFF | EXTRC oscillator: External RC on RA5/OSC1/CLKIN, CLKOUT function on RA4/OSC2/CLKOUT pin. | ||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0008) | ||||
| WDTE = OFF | 0x3FF7 | WDT disabled. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power-up Timer Enable bit (bitmask:0x0010) | ||||
| PWRTE = ON | 0x3FEF | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| MCLRE -- MCLR Pin Function Select bit (bitmask:0x0020) | ||||
| MCLRE = OFF | 0x3FDF | MCLR pin function is digital input, MCLR internally tied to VDD. | ||
| MCLRE = ON | 0x3FFF | MCLR pin function is MCLR. | ||
| CP -- Code Protection bit (bitmask:0x0040) | ||||
| CP = ON | 0x3FBF | Program memory code protection is enabled. | ||
| CP = OFF | 0x3FFF | Program memory code protection is disabled. | ||
| CPD -- Data Code Protection bit (bitmask:0x0080) | ||||
| CPD = ON | 0x3F7F | Data memory code protection is enabled. | ||
| CPD = OFF | 0x3FFF | Data memory code protection is disabled. | ||
| BOREN -- Brown Out Detect (bitmask:0x0300) | ||||
| BOREN = OFF | 0x3CFF | BOR disabled. | ||
| BOREN = SBODEN | 0x3DFF | BOR controlled by SBOREN bit of the PCON register. | ||
| BOREN = NSLEEP | 0x3EFF | BOR enabled during operation and disabled in Sleep. | ||
| BOREN = ON | 0x3FFF | BOR enabled. | ||
| IESO -- Internal External Switchover bit (bitmask:0x0400) | ||||
| IESO = OFF | 0x3BFF | Internal External Switchover mode is disabled. | ||
| IESO = ON | 0x3FFF | Internal External Switchover mode is enabled. | ||
| FCMEN -- Fail-Safe Clock Monitor Enabled bit (bitmask:0x0800) | ||||
| FCMEN = OFF | 0x37FF | Fail-Safe Clock Monitor is disabled. | ||
| FCMEN = ON | 0x3FFF | Fail-Safe Clock Monitor is enabled. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.