| PIC16F716 | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x20CF, default:0x20CF) | ||||
| FOSC -- Oscillator Selection bits (bitmask:0x0003) | ||||
| FOSC = LP | 0x3FFC | LP oscillator. | ||
| FOSC = XT | 0x3FFD | XT oscillator. | ||
| FOSC = HS | 0x3FFE | HS oscillator. | ||
| FOSC = RC | 0x3FFF | RC oscillator. | ||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0004) | ||||
| WDTE = OFF | 0x3FFB | WDT disabled and can be enabled by SWDTEN bit of the WDTCON register. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power-up Timer Enable bit (bitmask:0x0008) | ||||
| PWRTE = ON | 0x3FF7 | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| BOREN -- Brown-out Reset Enable bit (bitmask:0x0040) | ||||
| BOREN = OFF | 0x3FBF | BOR disabled. | ||
| BOREN = ON | 0x3FFF | BOR enabled. | ||
| BODENV -- Brown-out Reset Voltage bit (bitmask:0x0080) | ||||
| BODENV = 25 | 0x3F7F | VBOR set to 2.5V. | ||
| BODENV = 40 | 0x3FFF | VBOR set to 4.0V. | ||
| CP -- Code Protect (bitmask:0x2000) | ||||
| CP = ON | 0x1FFF | Program memory code protection is enabled. | ||
| CP = OFF | 0x3FFF | Program memory code protection is disabled. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.