| PIC16F917 | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x1FFF, default:0x1FFF) | ||||
| FOSC -- Oscillator Selection bits (bitmask:0x0007) | ||||
| FOSC = LP | 0x3FF8 | LP oscillator: Low-power crystal on RA6/OSC2/CLKOUT/T1OSO and RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = XT | 0x3FF9 | XT oscillator: Crystal/resonator on RA6/OSC2/CLKOUT/T1OSO and RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = HS | 0x3FFA | HS oscillator: High-speed crystal/resonator on RA6/OSC2/CLKOUT/T1OSO and RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = EC | 0x3FFB | EC: I/O function on RA6/OSC2/CLKOUT/T1OSO pin, CLKIN on RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = INTOSCIO | 0x3FFC | INTOSCIO oscillator: I/O function on RA6/OSC2/CLKOUT/T1OSO pin, I/O function on RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = INTOSCCLK | 0x3FFD | INTOSC oscillator: CLKOUT function on RA6/OSC2/CLKOUT/T1OSO pin, I/O function on RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = EXTRCIO | 0x3FFE | RCIO oscillator: I/O function on RA6/OSC2/CLKOUT/T1OSO pin, RC on RA7/OSC1/CLKIN/T1OSI. | ||
| FOSC = EXTRCCLK | 0x3FFF | RC oscillator: CLKOUT function on RA6/OSC2/CLKOUT/T1OSO pin, RC on RA7/OSC1/CLKIN/T1OSI. | ||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0008) | ||||
| WDTE = OFF | 0x3FF7 | WDT disabled and can be enabled by SWDTEN bit of the WDTCON register. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power Up Timer Enable bit (bitmask:0x0010) | ||||
| PWRTE = ON | 0x3FEF | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| MCLRE -- RE3/MCLR pin function select bit (bitmask:0x0020) | ||||
| MCLRE = OFF | 0x3FDF | RE3/MCLR pin function is digital input, MCLR internally tied to VDD. | ||
| MCLRE = ON | 0x3FFF | RE3/MCLR pin function is MCLR. | ||
| CP -- Code Protection bit (bitmask:0x0040) | ||||
| CP = ON | 0x3FBF | Program memory code protection is enabled. | ||
| CP = OFF | 0x3FFF | Program memory code protection is disabled. | ||
| CPD -- Data Code Protection bit (bitmask:0x0080) | ||||
| CPD = ON | 0x3F7F | Data memory code protection is enabled. | ||
| CPD = OFF | 0x3FFF | Data memory code protection is disabled. | ||
| BOREN -- Brown-out Reset Selection bits (bitmask:0x0300) | ||||
| BOREN = OFF | 0x3CFF | BOR disabled. | ||
| BOREN = SBODEN | 0x3DFF | BOR controlled by SBOREN bit of the PCON register. | ||
| BOREN = NSLEEP | 0x3EFF | BOR enabled during operation and disabled in Sleep. | ||
| BOREN = ON | 0x3FFF | BOR enabled. | ||
| IESO -- Internal External Switchover bit (bitmask:0x0400) | ||||
| IESO = OFF | 0x3BFF | Internal/External Switchover mode is disabled. | ||
| IESO = ON | 0x3FFF | Internal/External Switchover mode is enabled. | ||
| FCMEN -- Fail-Safe Clock Monitor Enabled bit (bitmask:0x0800) | ||||
| FCMEN = OFF | 0x37FF | Fail-Safe Clock Monitor is disabled. | ||
| FCMEN = ON | 0x3FFF | Fail-Safe Clock Monitor is enabled. | ||
| DEBUG -- In-Circuit Debugger Mode bit (bitmask:0x1000) | ||||
| DEBUG = ON | 0x2FFF | In-Circuit Debugger enabled, RB6/ICSPCLK and RB7/ICSPDAT are dedicated to the debugger. | ||
| DEBUG = OFF | 0x3FFF | In-Circuit Debugger disabled, RB6/ISCPCLK and RB7/ICSPDAT are general purpose I/O pins. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:46 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.