| PIC16LF627 | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x3DFF, default:0x3DFF) | ||||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0004) | ||||
| WDTE = OFF | 0x3FFB | WDT disabled. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power-up Timer Enable bit (bitmask:0x0008) | ||||
| PWRTE = ON | 0x3FF7 | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| FOSC -- Oscillator Selection bits (bitmask:0x0013) | ||||
| FOSC = LP | 0x3FEC | LP oscillator: Low-power crystal on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN. | ||
| FOSC = XT | 0x3FED | XT oscillator: Crystal/resonator on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN. | ||
| FOSC = HS | 0x3FEE | HS oscillator: High-speed crystal/resonator on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN. | ||
| FOSC = ECIO | 0x3FEF | EC: I/O function on RA6/OSC2/CLKOUT pin, CLKIN on RA7/OSC1/CLKIN. | ||
| FOSC = INTOSCIO | 0x3FFC | INTRC oscillator: I/O function on RA6/OSC2/CLKOUT pin, I/O function on RA7/OSC1/CLKIN. | ||
| FOSC = INTOSCCLK | 0x3FFD | INTRC oscillator: CLKOUT function on RA6/OSC2/CLKOUT pin, I/O function on RA7/OSC1/CLKIN. | ||
| FOSC = ERIO | 0x3FFE | ER oscillator: I/O function on RA6/OSC2/CLKOUT pin, Resistor on RA7/OSC1/CLKIN. | ||
| FOSC = ERCLK | 0x3FFF | ER oscillator: CLKOUT function on RA6/OSC2/CLKOUT pin, Resistor on RA7/OSC1/CLKIN. | ||
| MCLRE -- RA5/MCLR pin function select (bitmask:0x0020) | ||||
| MCLRE = OFF | 0x3FDF | RA5/MCLR pin function is digital input, MCLR internally tied to VDD. | ||
| MCLRE = ON | 0x3FFF | RA5/MCLR pin function is MCLR. | ||
| BOREN -- Brown-out Reset Enable bit (bitmask:0x0040) | ||||
| BOREN = OFF | 0x3FBF | BOD Reset disabled. | ||
| BOREN = ON | 0x3FFF | BOD Reset enabled. | ||
| LVP -- Low-Voltage Programming Enable bit (bitmask:0x0080) | ||||
| LVP = OFF | 0x3F7F | RB4/PGM pin has digital I/O function, HV on MCLR must be used for programming. | ||
| LVP = ON | 0x3FFF | RB4/PGM pin has PGM function, low-voltage programming enabled. | ||
| CPD -- Data Code Protection bit (bitmask:0x0100) | ||||
| CPD = ON | 0x3EFF | Data memory code protected. | ||
| CPD = OFF | 0x3FFF | Data memory code protection off. | ||
| CP -- Code Protection bits (bitmask:0x3C00) | ||||
| CP = ALL | 0x03FF | 0000h-03FFh code protected. | ||
| CP = 75 | 0x17FF | 0200h-03FFh code protected. | ||
| CP = 50 | 0x2BFF | Program memory code protection off. | ||
| CP = OFF | 0x3FFF | Program memory code protection off. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:47 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.