PIC18F6493

PIC18F6493

CONFIG1H (address:0x300001, mask:0xCF, default:0x07)

OSC -- Oscillator (bitmask:0x0F)
OSC = LP	0xF0	LP oscillator.
OSC = XT	0xF1	XT oscillator.
OSC = HS	0xF2	HS oscillator.
OSC = RC	0xF3	External RC oscillator, CLKO function on RA6.
OSC = EC	0xF4	EC oscillator, CLKO function on RA6.
OSC = ECIO	0xF5	EC oscillator, port function on RA6.
OSC = HSPLL	0xF6	HS oscillator, PLL enabled (clock frequency = 4 x FOSC1).
OSC = RCIO	0xF7	External RC oscillator, port function on RA6.
OSC = INTIO67	0xF8	Internal oscillator block, port function on RA6 and RA7.
OSC = INTIO7	0xF9	Internal oscillator block, CLKO function on RA6, port function on RA7.

FCMEN -- Fail-Safe Clock Monitor Enable (bitmask:0x40)
FCMEN = OFF	0xBF	Fail-Safe Clock Monitor disabled.
FCMEN = ON	0xFF	Fail-Safe Clock Monitor enabled.

IESO -- Internal External Switch Over Mode (bitmask:0x80)
IESO = OFF	0x7F	Oscillator Switchover mode disabled.
IESO = ON	0xFF	Oscillator Switchover mode enabled.

CONFIG2L (address:0x300002, mask:0x1F, default:0x1F)

PWRT -- Power Up Timer (bitmask:0x01)
PWRT = ON	0xFE	PWRT enabled.
PWRT = OFF	0xFF	PWRT disabled.

BOREN -- Brown Out Detect (bitmask:0x06)
BOREN = OFF	0xF9	Brown-out Reset disabled in hardware and software.
BOREN = ON	0xFB	Brown-out Reset enabled and controlled by software (SBOREN is enabled).
BOREN = NOSLP	0xFD	Brown-out Reset enabled in hardware only and disabled in Sleep mode (SBOREN is disabled).
BOREN = SBORDIS	0xFF	Brown-out Reset enabled in hardware only (SBOREN is disabled).

BORV -- Brown Out Voltage (bitmask:0x18)
BORV = 0	0xE7	VBOR set to 4.6V.
BORV = 1	0xEF	VBOR set to 4.3V.
BORV = 2	0xF7	VBOR set to 2.8V.
BORV = 3	0xFF	VBOR set to 2.1V.

CONFIG2H (address:0x300003, mask:0x1F, default:0x1F)

WDT -- Watchdog Timer (bitmask:0x01)
WDT = OFF	0xFE	WDT disabled (control is placed on the SWDTEN bit).
WDT = ON	0xFF	WDT enabled.

WDTPS -- Watchdog Postscaler (bitmask:0x1E)
WDTPS = 1	0xE1	1:1.
WDTPS = 2	0xE3	1:2.
WDTPS = 4	0xE5	1:4.
WDTPS = 8	0xE7	1:8.
WDTPS = 16	0xE9	1:16.
WDTPS = 32	0xEB	1:32.
WDTPS = 64	0xED	1:64.
WDTPS = 128	0xEF	1:128.
WDTPS = 256	0xF1	1:256.
WDTPS = 512	0xF3	1:512.
WDTPS = 1024	0xF5	1:1024.
WDTPS = 2048	0xF7	1:2048.
WDTPS = 4096	0xF9	1:4096.
WDTPS = 8192	0xFB	1:8192.
WDTPS = 16384	0xFD	1:16384.
WDTPS = 32768	0xFF	1:32768.

CONFIG3H (address:0x300005, mask:0x85, default:0x81)

CCP2MX -- CCP2 Mux (bitmask:0x01)
CCP2MX = PORTBE	0xFE	CCP2 input/output is multiplexed with RE7.
CCP2MX = PORTC	0xFF	CCP2 input/output is multiplexed with RC1.

LPT1OSC -- Low Power Timer1 Osc enable (bitmask:0x04)
LPT1OSC = OFF	0xFB	Timer1 configured for higher power operation.
LPT1OSC = ON	0xFF	Timer1 configured for low-power operation.

MCLRE -- Master Clear Enable (bitmask:0x80)
MCLRE = OFF	0x7F	RG5 input pin enabled; MCLR disabled.
MCLRE = ON	0xFF	MCLR pin enabled; RG5 input pin disabled.

CONFIG4L (address:0x300006, mask:0xC1, default:0x81)

STVREN -- Stack Overflow Reset (bitmask:0x01)
STVREN = OFF	0xFE	Stack full/underflow will not cause Reset.
STVREN = ON	0xFF	Stack full/underflow will cause Reset.

XINST -- Extended Instruction Set Enable bit (bitmask:0x40)
XINST = OFF	0xBF	Instruction set extension and Indexed Addressing mode disabled (Legacy mode).
XINST = ON	0xFF	Instruction set extension and Indexed Addressing mode enabled.

DEBUG -- Background Debugger Enable bit (bitmask:0x80)
DEBUG = ON	0x7F	Background debugger enabled, RB6 and RB7 are dedicated to In-Circuit Debug.
DEBUG = OFF	0xFF	Background debugger disabled, RB6 and RB7 configured as general purpose I/O pins.

CONFIG5L (address:0x300008, mask:0x01, default:0x01)

CP -- Code Protect 00000-03FFF (bitmask:0x01)
CP = ON	0xFE	Program memory block (000000-003FFFh) code-protected.
CP = OFF	0xFF	Program memory block (000000-003FFFh) not code-protected.

CONFIG1H (address:0x300001, mask:0xCF, default:0x07)

OSC -- Oscillator (bitmask:0x0F)

OSC = LP

0xF0

LP oscillator.

OSC = XT

0xF1

XT oscillator.

OSC = HS

0xF2

HS oscillator.

OSC = RC

0xF3

External RC oscillator, CLKO function on RA6.

OSC = EC

0xF4

EC oscillator, CLKO function on RA6.

OSC = ECIO

0xF5

EC oscillator, port function on RA6.

OSC = HSPLL

0xF6

HS oscillator, PLL enabled (clock frequency = 4 x FOSC1).

OSC = RCIO

0xF7

External RC oscillator, port function on RA6.

OSC = INTIO67

0xF8

Internal oscillator block, port function on RA6 and RA7.

OSC = INTIO7

0xF9

Internal oscillator block, CLKO function on RA6, port function on RA7.

FCMEN -- Fail-Safe Clock Monitor Enable (bitmask:0x40)

FCMEN = OFF

0xBF

Fail-Safe Clock Monitor disabled.

FCMEN = ON

0xFF

Fail-Safe Clock Monitor enabled.

IESO -- Internal External Switch Over Mode (bitmask:0x80)

IESO = OFF

0x7F

Oscillator Switchover mode disabled.

IESO = ON

0xFF

Oscillator Switchover mode enabled.

CONFIG2L (address:0x300002, mask:0x1F, default:0x1F)

PWRT -- Power Up Timer (bitmask:0x01)

PWRT = ON

0xFE

PWRT enabled.

PWRT = OFF

0xFF

PWRT disabled.

BOREN -- Brown Out Detect (bitmask:0x06)

BOREN = OFF

0xF9

Brown-out Reset disabled in hardware and software.

BOREN = ON

0xFB

Brown-out Reset enabled and controlled by software (SBOREN is enabled).

BOREN = NOSLP

0xFD

Brown-out Reset enabled in hardware only and disabled in Sleep mode (SBOREN is disabled).

BOREN = SBORDIS

0xFF

Brown-out Reset enabled in hardware only (SBOREN is disabled).

BORV -- Brown Out Voltage (bitmask:0x18)

BORV = 0

0xE7

VBOR set to 4.6V.

BORV = 1

0xEF

VBOR set to 4.3V.

BORV = 2

0xF7

VBOR set to 2.8V.

BORV = 3

0xFF

VBOR set to 2.1V.

CONFIG2H (address:0x300003, mask:0x1F, default:0x1F)

WDT -- Watchdog Timer (bitmask:0x01)

WDT = OFF

0xFE

WDT disabled (control is placed on the SWDTEN bit).

WDT = ON

0xFF

WDT enabled.

WDTPS -- Watchdog Postscaler (bitmask:0x1E)

WDTPS = 1

0xE1

1:1.

WDTPS = 2

0xE3

1:2.

WDTPS = 4

0xE5

1:4.

WDTPS = 8

0xE7

1:8.

WDTPS = 16

0xE9

1:16.

WDTPS = 32

0xEB

1:32.

WDTPS = 64

0xED

1:64.

WDTPS = 128

0xEF

1:128.

WDTPS = 256

0xF1

1:256.

WDTPS = 512

0xF3

1:512.

WDTPS = 1024

0xF5

1:1024.

WDTPS = 2048

0xF7

1:2048.

WDTPS = 4096

0xF9

1:4096.

WDTPS = 8192

0xFB

1:8192.

WDTPS = 16384

0xFD

1:16384.

WDTPS = 32768

0xFF

1:32768.

CONFIG3H (address:0x300005, mask:0x85, default:0x81)

CCP2MX -- CCP2 Mux (bitmask:0x01)

CCP2MX = PORTBE

0xFE

CCP2 input/output is multiplexed with RE7.

CCP2MX = PORTC

0xFF

CCP2 input/output is multiplexed with RC1.

LPT1OSC -- Low Power Timer1 Osc enable (bitmask:0x04)

LPT1OSC = OFF

0xFB

Timer1 configured for higher power operation.

LPT1OSC = ON

0xFF

Timer1 configured for low-power operation.

MCLRE -- Master Clear Enable (bitmask:0x80)

MCLRE = OFF

0x7F

RG5 input pin enabled; MCLR disabled.

MCLRE = ON

0xFF

MCLR pin enabled; RG5 input pin disabled.

CONFIG4L (address:0x300006, mask:0xC1, default:0x81)

STVREN -- Stack Overflow Reset (bitmask:0x01)

STVREN = OFF

0xFE

Stack full/underflow will not cause Reset.

STVREN = ON

0xFF

Stack full/underflow will cause Reset.

XINST -- Extended Instruction Set Enable bit (bitmask:0x40)

XINST = OFF

0xBF

Instruction set extension and Indexed Addressing mode disabled (Legacy mode).

XINST = ON

0xFF

Instruction set extension and Indexed Addressing mode enabled.

DEBUG -- Background Debugger Enable bit (bitmask:0x80)

DEBUG = ON

0x7F

Background debugger enabled, RB6 and RB7 are dedicated to In-Circuit Debug.

DEBUG = OFF

0xFF

Background debugger disabled, RB6 and RB7 configured as general purpose I/O pins.

CONFIG5L (address:0x300008, mask:0x01, default:0x01)

CP -- Code Protect 00000-03FFF (bitmask:0x01)

CP = ON

0xFE

Program memory block (000000-003FFFh) code-protected.

CP = OFF

0xFF

Program memory block (000000-003FFFh) not code-protected.

This page generated automatically by the device-help.pl program (2017-05-13 09:29:50 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.