PIC18F67K90

PIC18F67K90

CONFIG1L (address:0x300000, mask:0x5D, default:0x5D)

RETEN -- VREG Sleep Enable bit (bitmask:0x01)
RETEN = OFF	0xFE	Disabled - Controlled by SRETEN bit.
RETEN = ON	0xFF	Enabled.

INTOSCSEL -- LF-INTOSC Low-power Enable bit (bitmask:0x04)
INTOSCSEL = LOW	0xFB	LF-INTOSC in Low-power mode during Sleep.
INTOSCSEL = HIGH	0xFF	LF-INTOSC in High-power mode during Sleep.

SOSCSEL -- SOSC Power Selection and mode Configuration bits (bitmask:0x18)
SOSCSEL = LOW	0xEF	Low Power SOSC circuit selected.
SOSCSEL = DIG	0xF7	Digital (SCLKI) mode.
SOSCSEL = HIGH	0xFF	High Power SOSC circuit selected.

XINST -- Extended Instruction Set (bitmask:0x40)
XINST = OFF	0xBF	Disabled.
XINST = ON	0xFF	Enabled.

CONFIG1H (address:0x300001, mask:0xDF, default:0x08)

FOSC -- Oscillator (bitmask:0x0F)
FOSC = LP	0xF0	LP oscillator.
FOSC = XT	0xF1	XT oscillator.
FOSC = HS2	0xF2	HS oscillator (High power, 16 MHz - 25 MHz).
FOSC = HS1	0xF3	HS oscillator (Medium power, 4 MHz - 16 MHz).
FOSC = EC3IO	0xF4	EC oscillator, CLKOUT function on OSC2 (High power, 16 MHz - 64 MHz).
FOSC = EC3	0xF5	EC oscillator (High power, 16 MHz - 64 MHz).
FOSC = RC	0xF6	External RC oscillator, CLKOUT function on OSC2.
FOSC = RCIO	0xF7	External RC oscillator.
FOSC = INTIO2	0xF8	Internal RC oscillator.
FOSC = INTIO1	0xF9	Internal RC oscillator, CLKOUT function on OSC2.
FOSC = EC2IO	0xFA	EC oscillator, CLKOUT function on OSC2 (Medium power, 160 kHz - 16 MHz).
FOSC = EC2	0xFB	EC oscillator (Medium power, 160 kHz - 16 MHz).
FOSC = EC1IO	0xFC	EC oscillator, CLKOUT function on OSC2 (Low power, DC - 160 kHz).
FOSC = EC1	0xFD	EC oscillator (Low power, DC - 160 kHz).

PLLCFG -- PLL x4 Enable bit (bitmask:0x10)
PLLCFG = OFF	0xEF	Disabled.
PLLCFG = ON	0xFF	Enabled.

FCMEN -- Fail-Safe Clock Monitor (bitmask:0x40)
FCMEN = OFF	0xBF	Disabled.
FCMEN = ON	0xFF	Enabled.

IESO -- Internal External Oscillator Switch Over Mode (bitmask:0x80)
IESO = OFF	0x7F	Disabled.
IESO = ON	0xFF	Enabled.

CONFIG2L (address:0x300002, mask:0x7F, default:0x7F)

PWRTEN -- Power Up Timer (bitmask:0x01)
PWRTEN = ON	0xFE	Enabled.
PWRTEN = OFF	0xFF	Disabled.

BOREN -- Brown Out Detect (bitmask:0x06)
BOREN = OFF	0xF9	Disabled in hardware, SBOREN disabled.
BOREN = ON	0xFB	Controlled with SBOREN bit.
BOREN = NOSLP	0xFD	Enabled while active, disabled in SLEEP, SBOREN disabled.
BOREN = SBORDIS	0xFF	Enabled in hardware, SBOREN disabled.

BORV -- Brown-out Reset Voltage bits (bitmask:0x18)
BORV = 0	0xE7	3.0V.
BORV = 1	0xEF	2.7V.
BORV = 2	0xF7	2.0V.
BORV = 3	0xFF	1.8V.

BORPWR -- BORMV Power level (bitmask:0x60)
BORPWR = LOW	0x9F	BORMV set to low power level.
BORPWR = MEDIUM	0xBF	BORMV set to medium power level.
BORPWR = HIGH	0xDF	BORMV set to high power level.
BORPWR = ZPBORMV	0xFF	ZPBORMV instead of BORMV is selected.

CONFIG2H (address:0x300003, mask:0x7F, default:0x7F)

WDTEN -- Watchdog Timer (bitmask:0x03)
WDTEN = OFF	0xFC	WDT disabled in hardware; SWDTEN bit disabled.
WDTEN = NOSLP	0xFD	WDT enabled only while device is active and disabled in Sleep mode; SWDTEN bit disabled.
WDTEN = ON	0xFE	WDT controlled by SWDTEN bit setting.
WDTEN = SWDTDIS	0xFF	WDT enabled in hardware; SWDTEN bit disabled.

WDTPS -- Watchdog Postscaler (bitmask:0x7C)
WDTPS = 1	0x83	1:1.
WDTPS = 2	0x87	1:2.
WDTPS = 4	0x8B	1:4.
WDTPS = 8	0x8F	1:8.
WDTPS = 16	0x93	1:16.
WDTPS = 32	0x97	1:32.
WDTPS = 64	0x9B	1:64.
WDTPS = 128	0x9F	1:128.
WDTPS = 256	0xA3	1:256.
WDTPS = 512	0xA7	1:512.
WDTPS = 1024	0xAB	1:1024.
WDTPS = 2048	0xAF	1:2048.
WDTPS = 4096	0xB3	1:4096.
WDTPS = 8192	0xB7	1:8192.
WDTPS = 16384	0xBB	1:16384.
WDTPS = 32768	0xBF	1:32768.
WDTPS = 65536	0xC3	1:65536.
WDTPS = 131072	0xC7	1:131072.
WDTPS = 262144	0xCB	1:262144.
WDTPS = 524288	0xCF	1:524288.
WDTPS = 1048576	0xFF	1:1048576.

CONFIG3L (address:0x300004, mask:0x01, default:0x01)

RTCOSC -- RTCC Clock Select (bitmask:0x01)
RTCOSC = INTOSCREF	0xFE	RTCC uses INTRC.
RTCOSC = SOSCREF	0xFF	RTCC uses SOSC.

CONFIG3H (address:0x300005, mask:0x89, default:0x89)

CCP2MX -- CCP2 Mux (bitmask:0x01)
CCP2MX = PORTBE	0xFE	RE7-Microcontroller Mode/RB3-All other modes.
CCP2MX = PORTC	0xFF	RC1.

MSSPMSK -- MSSP address masking (bitmask:0x08)
MSSPMSK = MSK5	0xF7	5 bit address masking mode.
MSSPMSK = MSK7	0xFF	7 Bit address masking mode.

MCLRE -- Master Clear Enable (bitmask:0x80)
MCLRE = OFF	0x7F	MCLR Disabled, RG5 Enabled.
MCLRE = ON	0xFF	MCLR Enabled, RG5 Disabled.

CONFIG4L (address:0x300006, mask:0x91, default:0x91)

STVREN -- Stack Overflow Reset (bitmask:0x01)
STVREN = OFF	0xFE	Disabled.
STVREN = ON	0xFF	Enabled.

BBSIZ -- Boot Block Size (bitmask:0x10)
BBSIZ = BB1K	0xEF	1K word Boot Block size.
BBSIZ = BB2K	0xFF	2K word Boot Block size.

DEBUG -- Background Debug (bitmask:0x80)
DEBUG = ON	0x7F	Enabled.
DEBUG = OFF	0xFF	Disabled.

CONFIG5L (address:0x300008, mask:0xFF, default:0xFF)

CP0 -- Code Protect 00800-03FFF (bitmask:0x01)
CP0 = ON	0xFE	Enabled.
CP0 = OFF	0xFF	Disabled.

CP1 -- Code Protect 04000-07FFF (bitmask:0x02)
CP1 = ON	0xFD	Enabled.
CP1 = OFF	0xFF	Disabled.

CP2 -- Code Protect 08000-0BFFF (bitmask:0x04)
CP2 = ON	0xFB	Enabled.
CP2 = OFF	0xFF	Disabled.

CP3 -- Code Protect 0C000-0FFFF (bitmask:0x08)
CP3 = ON	0xF7	Enabled.
CP3 = OFF	0xFF	Disabled.

CP4 -- Code Protect 10000-13FFF (bitmask:0x10)
CP4 = ON	0xEF	Enabled.
CP4 = OFF	0xFF	Disabled.

CP5 -- Code Protect 14000-17FFF (bitmask:0x20)
CP5 = ON	0xDF	Enabled.
CP5 = OFF	0xFF	Disabled.

CP6 -- Code Protect 18000-1BFFF (bitmask:0x40)
CP6 = ON	0xBF	Enabled.
CP6 = OFF	0xFF	Disabled.

CP7 -- Code Protect 1C000-1FFFF (bitmask:0x80)
CP7 = ON	0x7F	Enabled.
CP7 = OFF	0xFF	Disabled.

CONFIG5H (address:0x300009, mask:0xC0, default:0xC0)

CPB -- Code Protect Boot (bitmask:0x40)
CPB = ON	0xBF	Enabled.
CPB = OFF	0xFF	Disabled.

CPD -- Data EE Read Protect (bitmask:0x80)
CPD = ON	0x7F	Enabled.
CPD = OFF	0xFF	Disabled.

CONFIG6L (address:0x30000A, mask:0xFF, default:0xFF)

WRT0 -- Table Write Protect 00800-03FFF (bitmask:0x01)
WRT0 = ON	0xFE	Enabled.
WRT0 = OFF	0xFF	Disabled.

WRT1 -- Table Write Protect 04000-07FFF (bitmask:0x02)
WRT1 = ON	0xFD	Enabled.
WRT1 = OFF	0xFF	Disabled.

WRT2 -- Table Write Protect 08000-0BFFF (bitmask:0x04)
WRT2 = ON	0xFB	Enabled.
WRT2 = OFF	0xFF	Disabled.

WRT3 -- Table Write Protect 0C000-0FFFF (bitmask:0x08)
WRT3 = ON	0xF7	Enabled.
WRT3 = OFF	0xFF	Disabled.

WRT4 -- Table Write Protect 10000-13FFF (bitmask:0x10)
WRT4 = ON	0xEF	Enabled.
WRT4 = OFF	0xFF	Disabled.

WRT5 -- Table Write Protect 14000-17FFF (bitmask:0x20)
WRT5 = ON	0xDF	Enabled.
WRT5 = OFF	0xFF	Disabled.

WRT6 -- Table Write Protect 18000-1BFFF (bitmask:0x40)
WRT6 = ON	0xBF	Enabled.
WRT6 = OFF	0xFF	Disabled.

WRT7 -- Table Write Protect 1C000-1FFFF (bitmask:0x80)
WRT7 = ON	0x7F	Enabled.
WRT7 = OFF	0xFF	Disabled.

CONFIG6H (address:0x30000B, mask:0xE0, default:0xE0)

WRTC -- Config. Write Protect (bitmask:0x20)
WRTC = ON	0xDF	Enabled.
WRTC = OFF	0xFF	Disabled.

WRTB -- Table Write Protect Boot (bitmask:0x40)
WRTB = ON	0xBF	Enabled.
WRTB = OFF	0xFF	Disabled.

WRTD -- Data EE Write Protect (bitmask:0x80)
WRTD = ON	0x7F	Enabled.
WRTD = OFF	0xFF	Disabled.

CONFIG7L (address:0x30000C, mask:0xFF, default:0xFF)

EBRT0 -- Table Read Protect 00800-03FFF (bitmask:0x01)
EBRT0 = ON	0xFE	Enabled.
EBRT0 = OFF	0xFF	Disabled.

EBRT1 -- Table Read Protect 04000-07FFF (bitmask:0x02)
EBRT1 = ON	0xFD	Enabled.
EBRT1 = OFF	0xFF	Disabled.

EBRT2 -- Table Read Protect 08000-0BFFF (bitmask:0x04)
EBRT2 = ON	0xFB	Enabled.
EBRT2 = OFF	0xFF	Disabled.

EBRT3 -- Table Read Protect 0C000-0FFFF (bitmask:0x08)
EBRT3 = ON	0xF7	Enabled.
EBRT3 = OFF	0xFF	Disabled.

EBRT4 -- Table Read Protect 10000-13FFF (bitmask:0x10)
EBRT4 = ON	0xEF	Enabled.
EBRT4 = OFF	0xFF	Disabled.

EBRT5 -- Table Read Protect 14000-17FFF (bitmask:0x20)
EBRT5 = ON	0xDF	Enabled.
EBRT5 = OFF	0xFF	Disabled.

EBRT6 -- Table Read Protect 18000-1BFFF (bitmask:0x40)
EBRT6 = ON	0xBF	Enabled.
EBRT6 = OFF	0xFF	Disabled.

EBRT7 -- Table Read Protect 1C000-1FFFF (bitmask:0x80)
EBRT7 = ON	0x7F	Enabled.
EBRT7 = OFF	0xFF	Disabled.

CONFIG7H (address:0x30000D, mask:0x40, default:0x40)

EBRTB -- Table Read Protect Boot (bitmask:0x40)
EBRTB = ON	0xBF	Enabled.
EBRTB = OFF	0xFF	Disabled.

CONFIG1L (address:0x300000, mask:0x5D, default:0x5D)

RETEN -- VREG Sleep Enable bit (bitmask:0x01)

RETEN = OFF

0xFE

Disabled - Controlled by SRETEN bit.

RETEN = ON

0xFF

Enabled.

INTOSCSEL -- LF-INTOSC Low-power Enable bit (bitmask:0x04)

INTOSCSEL = LOW

0xFB

LF-INTOSC in Low-power mode during Sleep.

INTOSCSEL = HIGH

0xFF

LF-INTOSC in High-power mode during Sleep.

SOSCSEL -- SOSC Power Selection and mode Configuration bits (bitmask:0x18)

SOSCSEL = LOW

0xEF

Low Power SOSC circuit selected.

SOSCSEL = DIG

0xF7

Digital (SCLKI) mode.

SOSCSEL = HIGH

0xFF

High Power SOSC circuit selected.

XINST -- Extended Instruction Set (bitmask:0x40)

XINST = OFF

0xBF

Disabled.

XINST = ON

0xFF

Enabled.

CONFIG1H (address:0x300001, mask:0xDF, default:0x08)

FOSC -- Oscillator (bitmask:0x0F)

FOSC = LP

0xF0

LP oscillator.

FOSC = XT

0xF1

XT oscillator.

FOSC = HS2

0xF2

HS oscillator (High power, 16 MHz - 25 MHz).

FOSC = HS1

0xF3

HS oscillator (Medium power, 4 MHz - 16 MHz).

FOSC = EC3IO

0xF4

EC oscillator, CLKOUT function on OSC2 (High power, 16 MHz - 64 MHz).

FOSC = EC3

0xF5

EC oscillator (High power, 16 MHz - 64 MHz).

FOSC = RC

0xF6

External RC oscillator, CLKOUT function on OSC2.

FOSC = RCIO

0xF7

External RC oscillator.

FOSC = INTIO2

0xF8

Internal RC oscillator.

FOSC = INTIO1

0xF9

Internal RC oscillator, CLKOUT function on OSC2.

FOSC = EC2IO

0xFA

EC oscillator, CLKOUT function on OSC2 (Medium power, 160 kHz - 16 MHz).

FOSC = EC2

0xFB

EC oscillator (Medium power, 160 kHz - 16 MHz).

FOSC = EC1IO

0xFC

EC oscillator, CLKOUT function on OSC2 (Low power, DC - 160 kHz).

FOSC = EC1

0xFD

EC oscillator (Low power, DC - 160 kHz).

PLLCFG -- PLL x4 Enable bit (bitmask:0x10)

PLLCFG = OFF

0xEF

Disabled.

PLLCFG = ON

0xFF

Enabled.

FCMEN -- Fail-Safe Clock Monitor (bitmask:0x40)

FCMEN = OFF

0xBF

Disabled.

FCMEN = ON

0xFF

Enabled.

IESO -- Internal External Oscillator Switch Over Mode (bitmask:0x80)

IESO = OFF

0x7F

Disabled.

IESO = ON

0xFF

Enabled.

CONFIG2L (address:0x300002, mask:0x7F, default:0x7F)

PWRTEN -- Power Up Timer (bitmask:0x01)

PWRTEN = ON

0xFE

Enabled.

PWRTEN = OFF

0xFF

Disabled.

BOREN -- Brown Out Detect (bitmask:0x06)

BOREN = OFF

0xF9

Disabled in hardware, SBOREN disabled.

BOREN = ON

0xFB

Controlled with SBOREN bit.

BOREN = NOSLP

0xFD

Enabled while active, disabled in SLEEP, SBOREN disabled.

BOREN = SBORDIS

0xFF

Enabled in hardware, SBOREN disabled.

BORV -- Brown-out Reset Voltage bits (bitmask:0x18)

BORV = 0

0xE7

3.0V.

BORV = 1

0xEF

2.7V.

BORV = 2

0xF7

2.0V.

BORV = 3

0xFF

1.8V.

BORPWR -- BORMV Power level (bitmask:0x60)

BORPWR = LOW

0x9F

BORMV set to low power level.

BORPWR = MEDIUM

0xBF

BORMV set to medium power level.

BORPWR = HIGH

0xDF

BORMV set to high power level.

BORPWR = ZPBORMV

0xFF

ZPBORMV instead of BORMV is selected.

CONFIG2H (address:0x300003, mask:0x7F, default:0x7F)

WDTEN -- Watchdog Timer (bitmask:0x03)

WDTEN = OFF

0xFC

WDT disabled in hardware; SWDTEN bit disabled.

WDTEN = NOSLP

0xFD

WDT enabled only while device is active and disabled in Sleep mode; SWDTEN bit disabled.

WDTEN = ON

0xFE

WDT controlled by SWDTEN bit setting.

WDTEN = SWDTDIS

0xFF

WDT enabled in hardware; SWDTEN bit disabled.

WDTPS -- Watchdog Postscaler (bitmask:0x7C)

WDTPS = 1

0x83

1:1.

WDTPS = 2

0x87

1:2.

WDTPS = 4

0x8B

1:4.

WDTPS = 8

0x8F

1:8.

WDTPS = 16

0x93

1:16.

WDTPS = 32

0x97

1:32.

WDTPS = 64

0x9B

1:64.

WDTPS = 128

0x9F

1:128.

WDTPS = 256

0xA3

1:256.

WDTPS = 512

0xA7

1:512.

WDTPS = 1024

0xAB

1:1024.

WDTPS = 2048

0xAF

1:2048.

WDTPS = 4096

0xB3

1:4096.

WDTPS = 8192

0xB7

1:8192.

WDTPS = 16384

0xBB

1:16384.

WDTPS = 32768

0xBF

1:32768.

WDTPS = 65536

0xC3

1:65536.

WDTPS = 131072

0xC7

1:131072.

WDTPS = 262144

0xCB

1:262144.

WDTPS = 524288

0xCF

1:524288.

WDTPS = 1048576

0xFF

1:1048576.

CONFIG3L (address:0x300004, mask:0x01, default:0x01)

RTCOSC -- RTCC Clock Select (bitmask:0x01)

RTCOSC = INTOSCREF

0xFE

RTCC uses INTRC.

RTCOSC = SOSCREF

0xFF

RTCC uses SOSC.

CONFIG3H (address:0x300005, mask:0x89, default:0x89)

CCP2MX -- CCP2 Mux (bitmask:0x01)

CCP2MX = PORTBE

0xFE

RE7-Microcontroller Mode/RB3-All other modes.

CCP2MX = PORTC

0xFF

RC1.

MSSPMSK -- MSSP address masking (bitmask:0x08)

MSSPMSK = MSK5

0xF7

5 bit address masking mode.

MSSPMSK = MSK7

0xFF

7 Bit address masking mode.

MCLRE -- Master Clear Enable (bitmask:0x80)

MCLRE = OFF

0x7F

MCLR Disabled, RG5 Enabled.

MCLRE = ON

0xFF

MCLR Enabled, RG5 Disabled.

CONFIG4L (address:0x300006, mask:0x91, default:0x91)

STVREN -- Stack Overflow Reset (bitmask:0x01)

STVREN = OFF

0xFE

Disabled.

STVREN = ON

0xFF

Enabled.

BBSIZ -- Boot Block Size (bitmask:0x10)

BBSIZ = BB1K

0xEF

1K word Boot Block size.

BBSIZ = BB2K

0xFF

2K word Boot Block size.

DEBUG -- Background Debug (bitmask:0x80)

DEBUG = ON

0x7F

Enabled.

DEBUG = OFF

0xFF

Disabled.

CONFIG5L (address:0x300008, mask:0xFF, default:0xFF)

CP0 -- Code Protect 00800-03FFF (bitmask:0x01)

CP0 = ON

0xFE

Enabled.

CP0 = OFF

0xFF

Disabled.

CP1 -- Code Protect 04000-07FFF (bitmask:0x02)

CP1 = ON

0xFD

Enabled.

CP1 = OFF

0xFF

Disabled.

CP2 -- Code Protect 08000-0BFFF (bitmask:0x04)

CP2 = ON

0xFB

Enabled.

CP2 = OFF

0xFF

Disabled.

CP3 -- Code Protect 0C000-0FFFF (bitmask:0x08)

CP3 = ON

0xF7

Enabled.

CP3 = OFF

0xFF

Disabled.

CP4 -- Code Protect 10000-13FFF (bitmask:0x10)

CP4 = ON

0xEF

Enabled.

CP4 = OFF

0xFF

Disabled.

CP5 -- Code Protect 14000-17FFF (bitmask:0x20)

CP5 = ON

0xDF

Enabled.

CP5 = OFF

0xFF

Disabled.

CP6 -- Code Protect 18000-1BFFF (bitmask:0x40)

CP6 = ON

0xBF

Enabled.

CP6 = OFF

0xFF

Disabled.

CP7 -- Code Protect 1C000-1FFFF (bitmask:0x80)

CP7 = ON

0x7F

Enabled.

CP7 = OFF

0xFF

Disabled.

CONFIG5H (address:0x300009, mask:0xC0, default:0xC0)

CPB -- Code Protect Boot (bitmask:0x40)

CPB = ON

0xBF

Enabled.

CPB = OFF

0xFF

Disabled.

CPD -- Data EE Read Protect (bitmask:0x80)

CPD = ON

0x7F

Enabled.

CPD = OFF

0xFF

Disabled.

CONFIG6L (address:0x30000A, mask:0xFF, default:0xFF)

WRT0 -- Table Write Protect 00800-03FFF (bitmask:0x01)

WRT0 = ON

0xFE

Enabled.

WRT0 = OFF

0xFF

Disabled.

WRT1 -- Table Write Protect 04000-07FFF (bitmask:0x02)

WRT1 = ON

0xFD

Enabled.

WRT1 = OFF

0xFF

Disabled.

WRT2 -- Table Write Protect 08000-0BFFF (bitmask:0x04)

WRT2 = ON

0xFB

Enabled.

WRT2 = OFF

0xFF

Disabled.

WRT3 -- Table Write Protect 0C000-0FFFF (bitmask:0x08)

WRT3 = ON

0xF7

Enabled.

WRT3 = OFF

0xFF

Disabled.

WRT4 -- Table Write Protect 10000-13FFF (bitmask:0x10)

WRT4 = ON

0xEF

Enabled.

WRT4 = OFF

0xFF

Disabled.

WRT5 -- Table Write Protect 14000-17FFF (bitmask:0x20)

WRT5 = ON

0xDF

Enabled.

WRT5 = OFF

0xFF

Disabled.

WRT6 -- Table Write Protect 18000-1BFFF (bitmask:0x40)

WRT6 = ON

0xBF

Enabled.

WRT6 = OFF

0xFF

Disabled.

WRT7 -- Table Write Protect 1C000-1FFFF (bitmask:0x80)

WRT7 = ON

0x7F

Enabled.

WRT7 = OFF

0xFF

Disabled.

CONFIG6H (address:0x30000B, mask:0xE0, default:0xE0)

WRTC -- Config. Write Protect (bitmask:0x20)

WRTC = ON

0xDF

Enabled.

WRTC = OFF

0xFF

Disabled.

WRTB -- Table Write Protect Boot (bitmask:0x40)

WRTB = ON

0xBF

Enabled.

WRTB = OFF

0xFF

Disabled.

WRTD -- Data EE Write Protect (bitmask:0x80)

WRTD = ON

0x7F

Enabled.

WRTD = OFF

0xFF

Disabled.

CONFIG7L (address:0x30000C, mask:0xFF, default:0xFF)

EBRT0 -- Table Read Protect 00800-03FFF (bitmask:0x01)

EBRT0 = ON

0xFE

Enabled.

EBRT0 = OFF

0xFF

Disabled.

EBRT1 -- Table Read Protect 04000-07FFF (bitmask:0x02)

EBRT1 = ON

0xFD

Enabled.

EBRT1 = OFF

0xFF

Disabled.

EBRT2 -- Table Read Protect 08000-0BFFF (bitmask:0x04)

EBRT2 = ON

0xFB

Enabled.

EBRT2 = OFF

0xFF

Disabled.

EBRT3 -- Table Read Protect 0C000-0FFFF (bitmask:0x08)

EBRT3 = ON

0xF7

Enabled.

EBRT3 = OFF

0xFF

Disabled.

EBRT4 -- Table Read Protect 10000-13FFF (bitmask:0x10)

EBRT4 = ON

0xEF

Enabled.

EBRT4 = OFF

0xFF

Disabled.

EBRT5 -- Table Read Protect 14000-17FFF (bitmask:0x20)

EBRT5 = ON

0xDF

Enabled.

EBRT5 = OFF

0xFF

Disabled.

EBRT6 -- Table Read Protect 18000-1BFFF (bitmask:0x40)

EBRT6 = ON

0xBF

Enabled.

EBRT6 = OFF

0xFF

Disabled.

EBRT7 -- Table Read Protect 1C000-1FFFF (bitmask:0x80)

EBRT7 = ON

0x7F

Enabled.

EBRT7 = OFF

0xFF

Disabled.

CONFIG7H (address:0x30000D, mask:0x40, default:0x40)

EBRTB -- Table Read Protect Boot (bitmask:0x40)

EBRTB = ON

0xBF

Enabled.

EBRTB = OFF

0xFF

Disabled.

This page generated automatically by the device-help.pl program (2017-05-13 09:29:50 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.