PIC18LF8585

PIC18LF8585

CONFIG1H (address:0x300001, mask:0x2F, default:0x2F)

OSC -- Oscillator (bitmask:0x0F)
OSC = LP	0xF0	LP oscillator.
OSC = XT	0xF1	XT oscillator.
OSC = HS	0xF2	HS oscillator.
OSC = RC	0xF3	RC oscillator with OSC2 configured as divide by 4 clock output.
OSC = EC	0xF4	EC oscillator with OSC2 configured as divide by 4 clock output.
OSC = ECIO	0xF5	EC oscillator with OSC2 configured as RA6.
OSC = HSPLL	0xF6	HS oscillator with HW enabled 4x PLL.
OSC = RCIO	0xF7	RC oscillator with OSC2 configured as RA6.
OSC = ECIOPLL	0xFC	EC oscillator with OSC2 configured as RA6 and HW enabled 4x PLL.
OSC = ECIOSWPLL	0xFD	EC oscillator with OSC2 configured as RA6 and SW enabled 4x PLL.
OSC = HSSWPLL	0xFE	HS oscillator with SW enabled 4x PLL.

OSCS -- Osc. Switch Enable (bitmask:0x20)
OSCS = ON	0xDF	Timer1 oscillator system clock switch option is enabled (oscillator switching is enabled).
OSCS = OFF	0xFF	Oscillator system clock switch option is disabled (main oscillator is source).

CONFIG2L (address:0x300002, mask:0x0F, default:0x0F)

PWRT -- Power Up Timer (bitmask:0x01)
PWRT = ON	0xFE	PWRT enabled.
PWRT = OFF	0xFF	PWRT disabled.

BOR -- Brown Out Detect (bitmask:0x02)
BOR = OFF	0xFD	Brown-out Reset disabled.
BOR = ON	0xFF	Brown-out Reset enabled.

BORV -- Brown Out Voltage (bitmask:0x0C)
BORV = 45	0xF3	VBOR set to 4.5V.
BORV = 42	0xF7	VBOR set to 4.2V.
BORV = 27	0xFB	VBOR set to 2.7V.
BORV = 20	0xFF	VBOR set to 2.0V.

CONFIG2H (address:0x300003, mask:0x1F, default:0x1F)

WDT -- Watchdog Timer (bitmask:0x01)
WDT = OFF	0xFE	WDT disabled (control is placed on the SWDTEN bit).
WDT = ON	0xFF	WDT enabled.

WDTPS -- Watchdog Postscaler (bitmask:0x1E)
WDTPS = 1	0xE1	1:1.
WDTPS = 2	0xE3	1:2.
WDTPS = 4	0xE5	1:4.
WDTPS = 8	0xE7	1:8.
WDTPS = 16	0xE9	1:16.
WDTPS = 32	0xEB	1:32.
WDTPS = 64	0xED	1:64.
WDTPS = 128	0xEF	1:128.
WDTPS = 256	0xF1	1:256.
WDTPS = 512	0xF3	1:512.
WDTPS = 1024	0xF5	1:1024.
WDTPS = 2048	0xF7	1:2048.
WDTPS = 4096	0xF9	1:4096.
WDTPS = 8192	0xFB	1:8192.
WDTPS = 16384	0xFD	1:16384.
WDTPS = 32768	0xFF	1:32768.

CONFIG3L (address:0x300004, mask:0x83, default:0x83)

MODE -- Processor Mode (bitmask:0x03)
MODE = EM	0xFC	Extended Microcontroller mode.
MODE = MPB	0xFD	Microprocessor with Boot Block mode.
MODE = MP	0xFE	Microprocessor mode.
MODE = MC	0xFF	Microcontroller mode.

WAIT -- External Bus Wait (bitmask:0x80)
WAIT = ON	0x7F	Wait selections for table reads and table writes are determined by WAIT1:WAIT0 bits (MEMCOM<5:4>).
WAIT = OFF	0xFF	Wait selections unavailable for table reads and table writes.

CONFIG3H (address:0x300005, mask:0x83, default:0x83)

CCP2MX -- CCP2 Mux (bitmask:0x01)
CCP2MX = OFF	0xFE	CCP2 is multiplexed with RB3 in Extended Microcontroller, Microprocessor or Microprocessor with Boot Block mode. Or with RE7 in Microcontroller mode.
CCP2MX = ON	0xFF	CCP2 input/output is multiplexed with RC1.

ECCPMX -- ECCP Mux (bitmask:0x02)
ECCPMX = PORTH	0xFD	P1B, P1C are multiplexed with RH7, RH6.
ECCPMX = PORTE	0xFF	P1B, P1C are multiplexed with RE6, RE5.

MCLRE -- MCLR enable (bitmask:0x80)
MCLRE = OFF	0x7F	RG5 input enabled, MCLR disabled.
MCLRE = ON	0xFF	MCLR pin enabled, RG5 input pin disabled.

CONFIG4L (address:0x300006, mask:0x85, default:0x85)

STVR -- Stack Overflow Reset (bitmask:0x01)
STVR = OFF	0xFE	Stack full/underflow will not cause Reset.
STVR = ON	0xFF	Stack full/underflow will cause Reset.

LVP -- Low Voltage Program (bitmask:0x04)
LVP = OFF	0xFB	Low-voltage ICSP disabled.
LVP = ON	0xFF	Low-voltage ICSP enabled.

DEBUG -- Background Debugger Enable bit (bitmask:0x80)
DEBUG = ON	0x7F	Background debugger enabled. RB6 and RB7 are dedicated to in-circuit debug.
DEBUG = OFF	0xFF	Background debugger disabled. RB6 and RB7 configured as general purpose I/O pins.

CONFIG5L (address:0x300008, mask:0x07, default:0x07)

CP0 -- Code Protect 000800-0003FFF (bitmask:0x01)
CP0 = ON	0xFE	Block 0 (000800-003FFFh) code-protected.
CP0 = OFF	0xFF	Block 0 (000800-003FFFh) not code-protected.

CP1 -- Code Protect 0004000-007FFF (bitmask:0x02)
CP1 = ON	0xFD	Block 1 (004000-007FFFh) code-protected.
CP1 = OFF	0xFF	Block 1 (004000-007FFFh) not code-protected.

CP2 -- Code Protect 008000-00BFFF (bitmask:0x04)
CP2 = ON	0xFB	Block 2 (008000-00BFFFh) code-protected.
CP2 = OFF	0xFF	Block 2 (008000-00BFFFh) not code-protected.

CONFIG5H (address:0x300009, mask:0xC0, default:0xC0)

CPB -- Code Protect Boot (bitmask:0x40)
CPB = ON	0xBF	Boot block (000000-0007FFh) code-protected.
CPB = OFF	0xFF	Boot block (000000-0007FFh) not code-protected.

CPD -- Data EE Read Protect (bitmask:0x80)
CPD = ON	0x7F	Data EEPROM code-protected.
CPD = OFF	0xFF	Data EEPROM not code-protected.

CONFIG6L (address:0x30000A, mask:0x07, default:0x07)

WRT0 -- Table Write Protect 00800-003FFF (bitmask:0x01)
WRT0 = ON	0xFE	Block 0 (000800-003FFFh) write-protected.
WRT0 = OFF	0xFF	Block 0 (000800-003FFFh) not write-protected.

WRT1 -- Table Write Protect 004000-007FFF (bitmask:0x02)
WRT1 = ON	0xFD	Block 1 (004000-007FFFh) write-protected.
WRT1 = OFF	0xFF	Block 1 (004000-007FFFh) not write-protected.

WRT2 -- Table Write Protect 08000-0BFFF (bitmask:0x04)
WRT2 = ON	0xFB	Block 2 (008000-00BFFFh) write-protected.
WRT2 = OFF	0xFF	Block 2 (008000-00BFFFh) not write-protected.

CONFIG6H (address:0x30000B, mask:0xE0, default:0xE0)

WRTC -- Config. Write Protect (bitmask:0x20)
WRTC = ON	0xDF	Configuration registers (300000-3000FFh) write-protected.
WRTC = OFF	0xFF	Configuration registers (300000-3000FFh) not write-protected.

WRTB -- Table Write Protect Boot (bitmask:0x40)
WRTB = ON	0xBF	Boot block (000000-0007FFh) write-protected.
WRTB = OFF	0xFF	Boot block (000000-0007FFh) not write-protected.

WRTD -- Data EE Write Protect (bitmask:0x80)
WRTD = ON	0x7F	Data EEPROM write-protected.
WRTD = OFF	0xFF	Data EEPROM not write-protected.

CONFIG7L (address:0x30000C, mask:0x07, default:0x07)

EBTR0 -- Table Read Protect 00800-003FFF (bitmask:0x01)
EBTR0 = ON	0xFE	Block 0 (000800-003FFFh) protected from table reads executed in other blocks.
EBTR0 = OFF	0xFF	Block 0 (000800-003FFFh) not protected from table reads executed in other blocks.

EBTR1 -- Table Read Protect 004000-07FFF (bitmask:0x02)
EBTR1 = ON	0xFD	Block 1 (004000-007FFFh) protected from table reads executed in other blocks.
EBTR1 = OFF	0xFF	Block 1 (004000-007FFFh) not protected from table reads executed in other blocks.

EBTR2 -- Table Read Protect 08000-0BFFF (bitmask:0x04)
EBTR2 = ON	0xFB	Block 2 (008000-00BFFFh) protected from table reads executed in other blocks.
EBTR2 = OFF	0xFF	Block 2 (008000-00BFFFh) not protected from table reads executed in other blocks.

CONFIG7H (address:0x30000D, mask:0x40, default:0x40)

EBTRB -- Table Read Protect Boot (bitmask:0x40)
EBTRB = ON	0xBF	Boot block (000000-0007FFh) protected from table reads executed in other blocks.
EBTRB = OFF	0xFF	Boot block (000000-0007FFh) not protected from table reads executed in other blocks.

CONFIG1H (address:0x300001, mask:0x2F, default:0x2F)

OSC -- Oscillator (bitmask:0x0F)

OSC = LP

0xF0

LP oscillator.

OSC = XT

0xF1

XT oscillator.

OSC = HS

0xF2

HS oscillator.

OSC = RC

0xF3

RC oscillator with OSC2 configured as divide by 4 clock output.

OSC = EC

0xF4

EC oscillator with OSC2 configured as divide by 4 clock output.

OSC = ECIO

0xF5

EC oscillator with OSC2 configured as RA6.

OSC = HSPLL

0xF6

HS oscillator with HW enabled 4x PLL.

OSC = RCIO

0xF7

RC oscillator with OSC2 configured as RA6.

OSC = ECIOPLL

0xFC

EC oscillator with OSC2 configured as RA6 and HW enabled 4x PLL.

OSC = ECIOSWPLL

0xFD

EC oscillator with OSC2 configured as RA6 and SW enabled 4x PLL.

OSC = HSSWPLL

0xFE

HS oscillator with SW enabled 4x PLL.

OSCS -- Osc. Switch Enable (bitmask:0x20)

OSCS = ON

0xDF

Timer1 oscillator system clock switch option is enabled (oscillator switching is enabled).

OSCS = OFF

0xFF

Oscillator system clock switch option is disabled (main oscillator is source).

CONFIG2L (address:0x300002, mask:0x0F, default:0x0F)

PWRT -- Power Up Timer (bitmask:0x01)

PWRT = ON

0xFE

PWRT enabled.

PWRT = OFF

0xFF

PWRT disabled.

BOR -- Brown Out Detect (bitmask:0x02)

BOR = OFF

0xFD

Brown-out Reset disabled.

BOR = ON

0xFF

Brown-out Reset enabled.

BORV -- Brown Out Voltage (bitmask:0x0C)

BORV = 45

0xF3

VBOR set to 4.5V.

BORV = 42

0xF7

VBOR set to 4.2V.

BORV = 27

0xFB

VBOR set to 2.7V.

BORV = 20

0xFF

VBOR set to 2.0V.

CONFIG2H (address:0x300003, mask:0x1F, default:0x1F)

WDT -- Watchdog Timer (bitmask:0x01)

WDT = OFF

0xFE

WDT disabled (control is placed on the SWDTEN bit).

WDT = ON

0xFF

WDT enabled.

WDTPS -- Watchdog Postscaler (bitmask:0x1E)

WDTPS = 1

0xE1

1:1.

WDTPS = 2

0xE3

1:2.

WDTPS = 4

0xE5

1:4.

WDTPS = 8

0xE7

1:8.

WDTPS = 16

0xE9

1:16.

WDTPS = 32

0xEB

1:32.

WDTPS = 64

0xED

1:64.

WDTPS = 128

0xEF

1:128.

WDTPS = 256

0xF1

1:256.

WDTPS = 512

0xF3

1:512.

WDTPS = 1024

0xF5

1:1024.

WDTPS = 2048

0xF7

1:2048.

WDTPS = 4096

0xF9

1:4096.

WDTPS = 8192

0xFB

1:8192.

WDTPS = 16384

0xFD

1:16384.

WDTPS = 32768

0xFF

1:32768.

CONFIG3L (address:0x300004, mask:0x83, default:0x83)

MODE -- Processor Mode (bitmask:0x03)

MODE = EM

0xFC

Extended Microcontroller mode.

MODE = MPB

0xFD

Microprocessor with Boot Block mode.

MODE = MP

0xFE

Microprocessor mode.

MODE = MC

0xFF

Microcontroller mode.

WAIT -- External Bus Wait (bitmask:0x80)

WAIT = ON

0x7F

Wait selections for table reads and table writes are determined by WAIT1:WAIT0 bits (MEMCOM<5:4>).

WAIT = OFF

0xFF

Wait selections unavailable for table reads and table writes.

CONFIG3H (address:0x300005, mask:0x83, default:0x83)

CCP2MX -- CCP2 Mux (bitmask:0x01)

CCP2MX = OFF

0xFE

CCP2 is multiplexed with RB3 in Extended Microcontroller, Microprocessor or Microprocessor with Boot Block mode. Or with RE7 in Microcontroller mode.

CCP2MX = ON

0xFF

CCP2 input/output is multiplexed with RC1.

ECCPMX -- ECCP Mux (bitmask:0x02)

ECCPMX = PORTH

0xFD

P1B, P1C are multiplexed with RH7, RH6.

ECCPMX = PORTE

0xFF

P1B, P1C are multiplexed with RE6, RE5.

MCLRE -- MCLR enable (bitmask:0x80)

MCLRE = OFF

0x7F

RG5 input enabled, MCLR disabled.

MCLRE = ON

0xFF

MCLR pin enabled, RG5 input pin disabled.

CONFIG4L (address:0x300006, mask:0x85, default:0x85)

STVR -- Stack Overflow Reset (bitmask:0x01)

STVR = OFF

0xFE

Stack full/underflow will not cause Reset.

STVR = ON

0xFF

Stack full/underflow will cause Reset.

LVP -- Low Voltage Program (bitmask:0x04)

LVP = OFF

0xFB

Low-voltage ICSP disabled.

LVP = ON

0xFF

Low-voltage ICSP enabled.

DEBUG -- Background Debugger Enable bit (bitmask:0x80)

DEBUG = ON

0x7F

Background debugger enabled. RB6 and RB7 are dedicated to in-circuit debug.

DEBUG = OFF

0xFF

Background debugger disabled. RB6 and RB7 configured as general purpose I/O pins.

CONFIG5L (address:0x300008, mask:0x07, default:0x07)

CP0 -- Code Protect 000800-0003FFF (bitmask:0x01)

CP0 = ON

0xFE

Block 0 (000800-003FFFh) code-protected.

CP0 = OFF

0xFF

Block 0 (000800-003FFFh) not code-protected.

CP1 -- Code Protect 0004000-007FFF (bitmask:0x02)

CP1 = ON

0xFD

Block 1 (004000-007FFFh) code-protected.

CP1 = OFF

0xFF

Block 1 (004000-007FFFh) not code-protected.

CP2 -- Code Protect 008000-00BFFF (bitmask:0x04)

CP2 = ON

0xFB

Block 2 (008000-00BFFFh) code-protected.

CP2 = OFF

0xFF

Block 2 (008000-00BFFFh) not code-protected.

CONFIG5H (address:0x300009, mask:0xC0, default:0xC0)

CPB -- Code Protect Boot (bitmask:0x40)

CPB = ON

0xBF

Boot block (000000-0007FFh) code-protected.

CPB = OFF

0xFF

Boot block (000000-0007FFh) not code-protected.

CPD -- Data EE Read Protect (bitmask:0x80)

CPD = ON

0x7F

Data EEPROM code-protected.

CPD = OFF

0xFF

Data EEPROM not code-protected.

CONFIG6L (address:0x30000A, mask:0x07, default:0x07)

WRT0 -- Table Write Protect 00800-003FFF (bitmask:0x01)

WRT0 = ON

0xFE

Block 0 (000800-003FFFh) write-protected.

WRT0 = OFF

0xFF

Block 0 (000800-003FFFh) not write-protected.

WRT1 -- Table Write Protect 004000-007FFF (bitmask:0x02)

WRT1 = ON

0xFD

Block 1 (004000-007FFFh) write-protected.

WRT1 = OFF

0xFF

Block 1 (004000-007FFFh) not write-protected.

WRT2 -- Table Write Protect 08000-0BFFF (bitmask:0x04)

WRT2 = ON

0xFB

Block 2 (008000-00BFFFh) write-protected.

WRT2 = OFF

0xFF

Block 2 (008000-00BFFFh) not write-protected.

CONFIG6H (address:0x30000B, mask:0xE0, default:0xE0)

WRTC -- Config. Write Protect (bitmask:0x20)

WRTC = ON

0xDF

Configuration registers (300000-3000FFh) write-protected.

WRTC = OFF

0xFF

Configuration registers (300000-3000FFh) not write-protected.

WRTB -- Table Write Protect Boot (bitmask:0x40)

WRTB = ON

0xBF

Boot block (000000-0007FFh) write-protected.

WRTB = OFF

0xFF

Boot block (000000-0007FFh) not write-protected.

WRTD -- Data EE Write Protect (bitmask:0x80)

WRTD = ON

0x7F

Data EEPROM write-protected.

WRTD = OFF

0xFF

Data EEPROM not write-protected.

CONFIG7L (address:0x30000C, mask:0x07, default:0x07)

EBTR0 -- Table Read Protect 00800-003FFF (bitmask:0x01)

EBTR0 = ON

0xFE

Block 0 (000800-003FFFh) protected from table reads executed in other blocks.

EBTR0 = OFF

0xFF

Block 0 (000800-003FFFh) not protected from table reads executed in other blocks.

EBTR1 -- Table Read Protect 004000-07FFF (bitmask:0x02)

EBTR1 = ON

0xFD

Block 1 (004000-007FFFh) protected from table reads executed in other blocks.

EBTR1 = OFF

0xFF

Block 1 (004000-007FFFh) not protected from table reads executed in other blocks.

EBTR2 -- Table Read Protect 08000-0BFFF (bitmask:0x04)

EBTR2 = ON

0xFB

Block 2 (008000-00BFFFh) protected from table reads executed in other blocks.

EBTR2 = OFF

0xFF

Block 2 (008000-00BFFFh) not protected from table reads executed in other blocks.

CONFIG7H (address:0x30000D, mask:0x40, default:0x40)

EBTRB -- Table Read Protect Boot (bitmask:0x40)

EBTRB = ON

0xBF

Boot block (000000-0007FFh) protected from table reads executed in other blocks.

EBTRB = OFF

0xFF

Boot block (000000-0007FFh) not protected from table reads executed in other blocks.

This page generated automatically by the device-help.pl program (2017-05-13 09:29:52 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.