| rfPIC12F675H | ||||
|---|---|---|---|---|
| CONFIG (address:0x2007, mask:0x01FF, default:0x01FF) | ||||
| FOSC -- Oscillator Selection bits (bitmask:0x0007) | ||||
| FOSC = LP | 0x3FF8 | LP oscillator: Low power crystal on GP4/OSC2/CLKOUT and GP5/OSC1/CLKIN. | ||
| FOSC = XT | 0x3FF9 | XT oscillator: Crystal/resonator on GP4/OSC2/CLKOUT and GP5/OSC1/CLKIN. | ||
| FOSC = HS | 0x3FFA | HS oscillator: High speed crystal/resonator on GP4/OSC2/CLKOUT and GP5/OSC1/CLKIN. | ||
| FOSC = EC | 0x3FFB | EC: I/O function on GP4/OSC2/CLKOUT pin, CLKIN on GP5/OSC1/CLKIN. | ||
| FOSC = INTRCIO | 0x3FFC | INTOSC oscillator: I/O function on GP4/OSC2/CLKOUT pin, I/O function on GP5/OSC1/CLKIN. | ||
| FOSC = INTRCCLK | 0x3FFD | INTOSC oscillator: CLKOUT function on GP4/OSC2/CLKOUT pin, I/O function on GP5/OSC1/CLKIN. | ||
| FOSC = EXTRCIO | 0x3FFE | RC oscillator: I/O function on GP4/OSC2/CLKOUT pin, RC on GP5/OSC1/CLKIN. | ||
| FOSC = EXTRCCLK | 0x3FFF | RC oscillator: CLKOUT function on GP4/OSC2/CLKOUT pin, RC on GP5/OSC1/CLKIN. | ||
| WDTE -- Watchdog Timer Enable bit (bitmask:0x0008) | ||||
| WDTE = OFF | 0x3FF7 | WDT disabled. | ||
| WDTE = ON | 0x3FFF | WDT enabled. | ||
| PWRTE -- Power-Up Timer Enable bit (bitmask:0x0010) | ||||
| PWRTE = ON | 0x3FEF | PWRT enabled. | ||
| PWRTE = OFF | 0x3FFF | PWRT disabled. | ||
| MCLRE -- GP3/MCLR pin function select (bitmask:0x0020) | ||||
| MCLRE = OFF | 0x3FDF | GP3/MCLR pin function is digital I/O, MCLR internally tied to VDD. | ||
| MCLRE = ON | 0x3FFF | GP3/MCLR pin function is MCLR. | ||
| BOREN -- Brown-out Detect Enable bit (bitmask:0x0040) | ||||
| BOREN = OFF | 0x3FBF | BOD disabled. | ||
| BOREN = ON | 0x3FFF | BOD enabled. | ||
| CP -- Code Protection bit (bitmask:0x0080) | ||||
| CP = ON | 0x3F7F | Program Memory code protection is enabled. | ||
| CP = OFF | 0x3FFF | Program Memory code protection is disabled. | ||
| CPD -- Data Code Protection bit (bitmask:0x0100) | ||||
| CPD = ON | 0x3EFF | Data memory code protection is enabled. | ||
| CPD = OFF | 0x3FFF | Data memory code protection is disabled. | ||
This page generated automatically by the device-help.pl program (2017-05-13 09:29:52 UTC) from the 8bit_device.info file (rev: 1.36) of mpasmx and from the gputils source package (rev: svn 1308). The mpasmx is included in the MPLAB X.